Page 4
under coated floor with automotive under coating - protects & seals |
cutting the inner skins . |
except for the door cutout the right side is ready |
Gluing the inner skin, next thing is to cut the door opening |
final fit check, next step is to glue & screw. Spars and inner roof comes next |
one side glued & screwed to floor - Gorilla Glue is great stuff |
while glue is setting up, cut all roof spars & hatch framing |
Both sides glued & screwed to floor - NOW ready to locate spars & inner roof skin |
With the counter top being a structural part, decided to locate the main |
counter top and frame the galley and interior cabinets. |
locating roof spars with ceiling thickness shim |
spars located and numbered for removal, (for locating ceiling) |
just another view, also showing vent location |
plywood does not compress - countersink all holes for flat head screws |
outside view of ceiling installed . |
How sweet it is - ceiling (formica) is sandwished between spars & inner side skins |
The skin for the most part is a floater will add 3M adhesive to first & last spar |
Aw flooring, must have flooring even though you won't see it  |
Doors are now finished, panels glued, window located & finished trimed |
Hinge installed (on door) checking for fit & gap (1/4") |
